|
|
Home > Electronic Bike > 36V 450W Hub Motor Electric Hybird Schwinn Mountain Bike w/ 36V 10Ah NiMH Battery Pack and 1 Smart Charger
36V 450W Hub Motor Electric Hybird Schwinn Mountain Bike w/ 36V 10Ah NiMH Battery Pack and 1 Smart Charger
|
|
Out of stock
Item Number: 100132
Manufacturer: Victoriz
Manufacturer Part No: 1000011
Personalization
* denotes required field
Wheel Size*
|
About Electric Mountain Bike w/ 36V DC 450W Brushless Hub Motor:
Describe
Features & Specifications
The Schwinn Aluminum Comp's hand-built, trail-tuned aluminum frame is designed for a perfect ride. SRAM MRX Pro 21-speed Grip Shift Shifters provide precise shifting in any terrain, while ProMax Alloy Finger Brake Levers help you maintain control of your stopping power under even the roughest conditions.
Play it safe! Always wear a helmet and safety pads when you ride. See our recommendations below.
Frame type: Mountain bike
Frame materials: Schwinn hand-built, trail-tuned 6061 aluminum frame
Suspension: Aluminum crown suspension fork
Gearing/Shifters: SRAM MRX Pro 21-speed Grip Shift shifters
Brakes: Alloy front and rear linear pull brakes
Wheels: Shimano 13-28T 7-speed freewheel
Additional features:
Quick release seat and tire
Bend seat stays
Shimano TY-32A front and Shimano TX-50 rear derailleur
Speeds: 21-speed with grip shift
Suspension: RST Omni 191 CL suspension fork
Frame: Aluminum frame
Bike Type: Mountain
Shipping Weight (in pounds): 40.0
Product in Inches (L x W x H): 64.0 x 24.0 x 43.0
Assembled in Country of Origin: USA
Origin of Components: China
Net Weight: 59.00 lbs
| Details
|
|
Select a picture
|
|
|
|
|
About 36V NiMH 10Ah Rechargeable Batterry Packs for Electronic Bike:
Describe
36V 10 Ah NiMH Battery Pack consists of three 12V 10Ah NiMH battery modules.
Wrapped by heavy duty Heat shrink tube.
Volatge 36V ( working ) 43V ( peak)
Capacity 10Ah or 360 wh
Charging Rate Standard 1.8 A Max. 5 A
Discharging Rate
* Standard rate: 10Amp ( Recommended and warrantied)
* Highest rate for continuous running: 30Amp
* Max. Rate for short time: 50Amp ( Not recommend as working rate )
Prewired:
* 3 Charging terminals: 18AWG wire with mini Tamiya connector female and connect with a 65o thermostat.
* 3 Discharging terminals: 14 AWG wire standard Tamiya connector female with 30A rating
* When discharging, please use 3 to 1 Tamiya Connector ( included) to connect three 12V Modules in series and form a 36V 13Ah battery pack.
Size: 9.5" x 6" x 2.5"
Net Weight: 10.00 lbs
| Details
|
|
Select a picture
|
|
|
|
|
About Multi-Current Universal Smart Charger for 7.2V - 12 V NiMH/ NiCd Battery Packs:
Describe
* It is a multi-current Universal Fast and Smart Charger for any NiMH /NiCd battery packs from 7.2V-12V ( 6 - 10 cell pack)
* 120-240V AC input for world wide voltage support.
* Designed for use with 7.2V-12V Battery Packs. Please don't charge battery under 7.2V or over 12V and battery pack with capacity<900mah
* Idea for mini Airsoft gun battery packs.
* Using Pulse and Negative pulse technology ( 10% negative puls ) to avoid battery overheating and polarized during fast charging, Significantly increasing battery pack's cycle life.
* Automatically detect battery pack's voltage, Red LED will be on during charging.
* Automatically cut-off by negative delta V when battery pack get fully charged.
* Two current levels, e.g. 0.9A and 1.8A are selectable by a switch.
* For battery pack between 1100mah and 2100mah, please use the low level switch -- charging rate: 0.9A
* For battery pack over 2100 mah, please use the high level switch -- charging rate: 1.8A
* Charging time from approx. 30 mins to 100 mins depending on the capacity of battery. For 3000 mAh battery pack, charging time is about 90 minutes and for 1800 mAh battery pack , charging time is 60 min.
* One standard Tamiya male connector installed with the charger. Ideal for charging all 8.4V,9.6V and 12V RC Car, RC air and Airsoft battery packs .
* One set of Clip adapter with female tamiya connector included for charging any battery packs.
* One connector adpator from standard Male Tamiya to Female Mini Tamiya for charging RC air battery packs.
* It is very smart charger. You don't need take care anything, just plug in and wait for battery charging ready
* Dimension: 1.5"H X 2.5"W X 5.5"L.
* Weight: 0.6LB.
Size: 5.5" x 2.5" x 1.5"
Net Weight: 0.60 lb
Caution
Please don't use the charger for low capacity battery pack (<900mah).
Strongly suggestion to use high drain rate battery pack.
We are not responsible for any damage caused.
Tips
Connect battery pack to output connector and plug AC power source
Make sure battery polarity is connected correctly (Red wire is positive)
When the unit connect the AC source, the red LED and green LED flash for two times, then all off.
After it connect the correct battery pack, the red LED will be on, shows that it is charging.
After battery is fully charged, green LED will be on and it shows the battery fully charged.
| Details
|
|
Select a picture
|
|
|
|
|
|
Product Reviews
|
|