About Electric Bike Conversion Kit - Front Hub Motor with Rim and Full Accessories:
Describe
The conversion kit combines the full E-bike technology: direct drive Brushless hi-torque hub Motor combine with SLA, NiMH or Li-Ion rechargeable batteries to change almost every bicycle into a personal electric bike. Save energy, protect environment and save money with a lot of fun.
Functions
High power brushless hub motor that allows upto 25 MPH top speed.
Full Completely conversion kit included:
o Brushless Hub Motor mounted rim.
o Prewired controller unit with 35 Amp current limit.
o Prewired thumb throttle with LED Light and Battery Energy Guage.
o Key switch integrated Spped Controller(for security and sleep speed controller)
o Battery pack carrier bag and rack.
Easy to install within 30 minutes.
Net Weight: 12.00 lbs
| Details
|
|
Select a picture
|
|
|
|
|
About Brushless Up to 750W Front Hub Motor - Special for Electronic Bike:
Describe
This motor uses relatively new technology, and is more power efficient than a Brushed motor.
It has three phases, or power supply wires (think of this as a 3-cylinders automobile engine.) Each of these phases fires in succession with the others.
Size: 2 3/4" x 9 3/4" x 9 3/4"
Net Weight: 12.00 lbs
| Details
|
|
Select a picture
|
|
|
|
|
About Speed Controller for Brushless 48V DC Motor w/ Speed Adjustment Thumb Throttle(5 Feet Long Cable and 7/8" Dia. Hole) - Special for Electronic Bike:
Describe
This is replacement of speed controller only for brushless hub motor from Victoriz / www.CampSolution.com
Part included:
Prewired speed controller unit with 18 Amp current limit, 48VDC input, with 5 connectors(From battery - 2 pins connector with 6" long wire; For key switch - 2 pins connector with 6" long wire; To hub brushless motor - 3 Pins connector with 46" long wire; To thumb throttle - 5pins connector with 6" long wire, To brake swith - 2 pins connector with 6" long wire)
Thumb throttle with 67" Long Cable and 7/8" Dia. Hole, can mount to standard bike's handle bar. Thumb throttle with LED battery full, charge, empty LED indicator
Prewired key switch (for security and sleep Speed Controller)
Size: 5" x 3" x 1 1/4"
Net Weight: 1.00 lb
| Details
|
|
Select a picture
|
|
|
|
|
About Bike Rear Rack Nylon Bag for Battery Carry or Multi Purpose:
Describe
This Nylon Carrying Bag is special designed for bike on rear rack.
This bag have 14"length, 6"width and 6" height content, and one small bag on cover.
Size: 14.00" x 6.00" x 6.00"
Net Weight: 1.00 oz
| Details
|
|
Select a picture
|
|
|
|
|
About BACK TRAILS TM Rear Bike Rack:
Describe
Lightweight alloy Design
Spring bracket
Please refer the illustration as installation instructions:
1. Bolt rear struts to top hole in plate(A).
2. Bolt mounting bars(B) to rack platform.
3. Bolt pivots(C) to mounting bars.
4. Screw bottom of plate to top of drop-out(D).
5. Screw bolt pivots to brazons(E).
Note: If your bike is not equipped with rear brazons, use C-clamps enclosed(F).
6. Adjust and tighten all bolts and screws securely.
Note: Periodically check all nuts and bolt for tightness.
Size: 15" x 5.7" x 3.5"
Net Weight: 30.00 oz
Caution
Not for carrying passengers.
Not for carrying loads exceeding 20 lbs.
| Details
|
|
Select a picture
|
|
|
|
|